New England New England 6 States Songs: https://www.reddit.com/newengland/comments/er8wxd/new_england_6_states_songs/ NewEnglandcoin Symbol: NENG NewEnglandcoin is a clone of Bitcoin using scrypt as a proof-of-work algorithm with enhanced features to protect against 51% attack and decentralize on mining to allow diversified mining rigs across CPUs, GPUs, ASICs and Android phones. Mining Algorithm: Scrypt with RandomSpike. RandomSpike is 3rd generation of Dynamic Difficulty (DynDiff) algorithm on top of scrypt. 1 minute block targets base difficulty reset: every 1440 blocks subsidy halves in 2.1m blocks (~ 2 to 4 years) 84,000,000,000 total maximum NENG 20000 NENG per block Pre-mine: 1% - reserved for dev fund ICO: None RPCPort: 6376 Port: 6377 NewEnglandcoin has dogecoin like supply at 84 billion maximum NENG. This huge supply insures that NENG is suitable for retail transactions and daily use. The inflation schedule of NengEnglandcoin is actually identical to that of Litecoin. Bitcoin and Litecoin are already proven to be great long term store of value. The Litecoin-like NENG inflation schedule will make NewEnglandcoin ideal for long term investment appreciation as the supply is limited and capped at a fixed number Bitcoin Fork - Suitable for Home Hobbyists NewEnglandcoin core wallet continues to maintain version tag of "Satoshi v0.8.7.5" because NewEnglandcoin is very much an exact clone of bitcoin plus some mining feature changes with DynDiff algorithm. NewEnglandcoin is very suitable as lite version of bitcoin for educational purpose on desktop mining, full node running and bitcoin programming using bitcoin-json APIs. The NewEnglandcoin (NENG) mining algorithm original upgrade ideas were mainly designed for decentralization of mining rigs on scrypt, which is same algo as litecoin/dogecoin. The way it is going now is that NENG is very suitable for bitcoin/litecoin/dogecoin hobbyists who can not , will not spend huge money to run noisy ASIC/GPU mining equipments, but still want to mine NENG at home with quiet simple CPU/GPU or with a cheap ASIC like FutureBit Moonlander 2 USB or Apollo pod on solo mining setup to obtain very decent profitable results. NENG allows bitcoin litecoin hobbyists to experience full node running, solo mining, CPU/GPU/ASIC for a fun experience at home at cheap cost without breaking bank on equipment or electricity. MIT Free Course - 23 lectures about Bitcoin, Blockchain and Finance (Fall,2018) https://www.youtube.com/playlist?list=PLUl4u3cNGP63UUkfL0onkxF6MYgVa04Fn CPU Minable Coin Because of dynamic difficulty algorithm on top of scrypt, NewEnglandcoin is CPU Minable. Users can easily set up full node for mining at Home PC or Mac using our dedicated cheetah software. Research on the first forked 50 blocks on v1.2.0 core confirmed that ASIC/GPU miners mined 66% of 50 blocks, CPU miners mined the remaining 34%. NENG v1.4.0 release enabled CPU mining inside android phones. Youtube Video Tutorial How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 1 https://www.youtube.com/watch?v=sdOoPvAjzlE How to CPU Mine NewEnglandcoin (NENG) in Windows 10 Part 2 https://www.youtube.com/watch?v=nHnRJvJRzZg How to CPU Mine NewEnglandcoin (NENG) in macOS https://www.youtube.com/watch?v=Zj7NLMeNSOQ Decentralization and Community Driven NewEnglandcoin is a decentralized coin just like bitcoin. There is no boss on NewEnglandcoin. Nobody nor the dev owns NENG. We know a coin is worth nothing if there is no backing from community. Therefore, we as dev do not intend to make decision on this coin solely by ourselves. It is our expectation that NewEnglandcoin community will make majority of decisions on direction of this coin from now on. We as dev merely view our-self as coin creater and technical support of this coin while providing NENG a permanent home at ShorelineCrypto Exchange. Twitter Airdrop Follow NENG twitter and receive 100,000 NENG on Twitter Airdrop to up to 1000 winners Graphic Redesign Bounty Top one award: 90.9 million NENG Top 10 Winners: 500,000 NENG / person Event Timing: March 25, 2019 - Present Event Address: NewEnglandcoin DISCORD at: https://discord.gg/UPeBwgs Please complete above Twitter Bounty requirement first. Then follow Below Steps to qualify for the Bounty: (1) Required: submit your own designed NENG logo picture in gif, png jpg or any other common graphic file format into DISCORD "bounty-submission" board (2) Optional: submit a second graphic for logo or any other marketing purposes into "bounty-submission" board. (3) Complete below form. Please limit your submission to no more than two total. Delete any wrongly submitted or undesired graphics in the board. Contact DISCORD u/honglu69#5911 or u/krypton#6139 if you have any issues. Twitter Airdrop/Graphic Redesign bounty sign up: https://goo.gl/forms/L0vcwmVi8c76cR7m1 Milestones
Sep 3, 2018 - Genesis block was mined, NewEnglandcoin created
Sep 8, 2018 - github source uploaded, Window wallet development work started
Sep 11,2018 - Window Qt Graphic wallet completed
Sep 12,2018 - NewEnglandcoin Launched in both Bitcointalk forum and Marinecoin forum
Sep 14,2018 - NewEnglandcoin is listed at ShorelineCrypto Exchange
Sep 17,2018 - Block Explorer is up
Nov 23,2018 - New Source/Wallet Release v1.1.1 - Enabled Dynamic Addjustment on Mining Hashing Difficulty
Nov 28,2018 - NewEnglandcoin became CPU minable coin
Nov 30,2018 - First Retail Real Life usage for NewEnglandcoin Announced
Dec 28,2018 - Cheetah_Cpuminer under Linux is released
Dec 31,2018 - NENG Technical Whitepaper is released
Jan 2,2019 - Cheetah_Cpuminer under Windows is released
Jan 12,2019 - NENG v1.1.2 is released to support MacOS GUI CLI Wallet
Jan 13,2019 - Cheetah_CpuMiner under Mac is released
Feb 11,2019 - NewEnglandcoin v1.2.0 Released, Anti-51% Attack, Anti-instant Mining after Hard Fork
Mar 16,2019 - NewEnglandcoin v220.127.116.11 Released - Ubuntu 18.04 Wallet Binary Files
Apr 7, 2019 - NENG Report on Security, Decentralization, Valuation
Apr 21, 2019 - NENG Fiat Project is Launched by ShorelineCrypto
Sep 1, 2019 - Shoreline Tradingbot project is Launched by ShorelineCrypto
Dec 19, 2019 - Shoreline Tradingbot v1.0 is Released by ShorelineCrypto
Jan 30, 2020 - Scrypt RandomSpike - NENG v1.3.0 Hardfork Proposed
Feb 24, 2020 - Scrypt RandomSpike - NENG core v1.3.0 Released
Jun 19, 2020 - Linux scripts for Futurebit Moonlander2 USB ASIC on solo mining Released
Jul 15, 2020 - NENG v1.4.0 Released for Android Mining and Ubuntu 20.04 support
Jul 21, 2020 - NENG v18.104.22.168 Released for MacOS Wallet Upgrade with Catalina
Jul 30, 2020 - NENG v22.214.171.124 Released for Linux Wallet Upgrade with 8 Distros
Aug 11, 2020 - NENG v126.96.36.199 Released for Android arm64 Upgrade, Chromebook Support
Aug 30, 2020 - NENG v188.8.131.52 Released for Android/Chromebook with armhf, better hardware support
2018 Q3 - Birth of NewEnglandcoin, window/linux wallet - Done
2018 Q4 - Decentralization Phase I
Blockchain Upgrade - Dynamic hashing algorithm I - Done
Cheetah Version I- CPU Mining Automation Tool on Linux - Done
2019 Q1 - Decentralization Phase II
Cheetah Version II- CPU Mining Automation Tool on Window/Linux - Done
Blockchain Upgrade Dynamic hashing algorithm II - Done
2019 Q2 - Fiat Phase I
Assessment of Risk of 51% Attack on NENG - done
Launch of Fiat USD/NENG offering for U.S. residents - done
Initiation of Mobile Miner Project - Done
2019 Q3 - Shoreline Tradingbot, Mobile Project
Evaluation and planning of Mobile Miner Project - on Hold
Initiation of Trading Bot Project - Done
2019 Q4 - Shoreline Tradingbot
Shoreline tradingbot Release v1.0 - Done
2020 Q1 - Evaluate NENG core, Mobile Wallet Phase I
NENG core Decentralization Security Evaluation for v1.3.x - Done
Light Mobile Wallet Project Initiation, Evaluation
2020 Q2 - NENG Core, Mobile Wallet Phase II
NENG core Decentralization Security Hardfork on v1.3.x - Scrypt RandomSpike
Light Mobile Wallet Project Design, Coding
2020 Q3 - NENG core, NENG Mobile Wallet Phase II
Review on results of v1.3.x, NENG core Dev Decision on v1.4.x, Hardfork If needed
Light Mobile Wallet Project testing, alpha Release
2020 Q4 - Mobile Wallet Phase III
Light Mobile Wallet Project Beta Release
Light Mobile Wallet Server Deployment Evaluation and Decision
Storage space: I am using an 8 GB microSD card for the OS, and a 128 GB USB drive for data. Minimums I would recommend: 8GB SD card and 32 GB USB drive.
Reddcoin Core client version: v184.108.40.206-a8767ba-beta (most recent version at this moment). ↳ Screenshot
You need the OS; Lubuntu. Download Lubuntu (707 MB) for the Raspberry Pi: https://ubuntu-pi-flavour-maker.org/download/. It's a .torrent download, so you will need a BitTorrent client. Message me or post in this thread if you need help with this.
You need software to write the OS to the SD card. I use Etcher. Download Etcher: https://etcher.io/.
Select image: select the lubuntu-16.04.2-desktop-armhf-raspberry-pi.img.xz file.
Select drive: select your microSD card.
Plug the SD card into your Raspberry Pi and power it up.
Lubuntu should boot up.
Set up Lubuntu, connect to the internet (wired or wireless). ↳ As username, I chose "rpi3b". You will see this username throughout this whole tutorial.
Make sure date and time are correct ([Menu] > System Tools > Time and Date). ↳ Click on Unlock to make changes. I personally change Configuration to "Keep synchronized with Internet servers". ↳ Screenshot
Reboot ([Menu] > Logout > Reboot). I am connected to wifi, but have issues getting wifi to work on initial boot. A reboot solves this issue.
Make sure system is up-to-date, install never versions.
Open LXTerminal ([Menu] > System Tools > LXTerminal). ↳ Screenshot
Enter the following in LXTerminal: sudo apt update && sudo apt upgrade ↳ Screenshot
You will be asked if you really want to continue. Enter Y (yes).
Updates are being installed! Wait until it's finished.
Install programs that will be used in this tutorial.
GParted: to partition the USB drive.
Htop: to see the amount of memory (RAM) and swap that is in use.
Enter the following in LXTerminal to install these 2 programs. sudo apt install gparted && sudo apt install htop ↳ Screenshot
Create 2 partitions on the USB drive: 1) Swap partition 2) data partition (for the Reddcoin blockchain) The swap partition is necessary: The Reddcoin wallet can be memory intensive. To prevent any crashes or freezes, add 2 GB of 'virtual' memory by creating a swap partition.
Important: Backup your USB drive if needed. The USB drive will be formatted, so the data on the USB drive will be wiped.
Please use the USB drive solely for this purpose, do not combine it with other stuff.
Keep your USB drive plugged in, do not (randomly) plug it out.
Plug your USB drive in.
GParted will be used to create the partititons. Start GParted via LXTerminal: sudo gparted ↳ Screenshot
Apply the changes. Click on the check mark or select Edit > Apply All Operations. ↳ Screenshot ↳ Screenshot
Important: The name of the swap partition is needed later, so please write it down. Mine is /dev/sda1 (first partition on first drive (drive 'a')). ↳ Screenshot
Reboot. After the reboot, the data partition you just created should be visible on your desktop. ↳ Screenshot
The swap partition is created, so now we can enable and use it.
The swap in use can be monitored with the program Htop. Open Htop ([Menu] > System Tools > Htop) to see the 'Swp' (swap) in use. ↳ Screenshot By default, swap is not used, so 0K. ↳ Screenshot You can leave Htop open.
To enable the swap partition, open LXTerminal and enter the following commands: (Assuming /dev/sda1 is your swap partition.)
Unpack the file (large file, takes around 15 minutes to unpack): sudo xz -d bootstrap.dat.xz ↳ Screenshot
After a successful unpack, your will find the file bootstrap.dat in your USB root folder. ↳ Screenshot
On the first run of the Reddcoin Core client, it will ask for a data directory to store the blockchain and wallet data.
Start the Reddcoin Core client: sudo /media/rpi3b/usb/reddcoin/src/qt/reddcoin-qt ↳ Screenshot
The welcome screen will appear and ask you about the data directory. I suggest a new folder on your USB drive, I picked blockchain. The directory will be created with all the necessary files. ↳ Screenshot
Click on the three dots (...) on the right. ↳ Screenshot
Click on Create Folder at the upper right corner. Type and enter in the folder name. (In my case: blockchain.) Click on Open. ↳ Screenshot ↳ Screenshot ↳ Screenshot
After selecting the directory, the Reddcoin Core client will start. Wait till it's fully loaded and close it.
Move the bootstrap.dat file to your data directory you selected in the previous step. By doing this, Reddcoin Core will use the bootstrap.dat file to import the blockchain, which speeds up syncing. sudo mv bootstrap.dat /media/rpi3b/usb/blockchain/ (Assuming blockchain as data directory.) ↳ Screenshot
The Reddcoin Core client set up is completed, but you still have to sync fully with the blockchain before you can send, receive and stake.
Keep the client running until it's fully synchronized. It will use the bootstrap file first, and download the rest of the blockchain to complete the sync. This can take some time (it took 2 days for me). Syncing the blockchain uses a lot of resources, so the software may react slow.
You can see the progress in the debug window (Help > Debug window). ↳ Screenshot
When the synchronization is completed, the red (out of sync) will disappear on the Overview screen! ↳ Screenshot
When synchronization is complete, you can start staking your Reddcoins.
You can write down your private key or copy and save it in a document. Make sure you save it somewhere only you can access it.
To import later: Debug window -> Console -> importprivkey [label] [label] is optional. ↳ Screenshot (without a label) ↳ Screenshot (with a label)
Boot with only 1 USB drive plugged in: Make sure only the USB drive (with the swap partition and data partition) is plugged in when you boot up your Raspberry Pi. This to make sure the swap partition (/dev/sda1) is recognized correctly. If you boot up with multiple USB drives, Lubuntu might see the USB drive with the swap partition as the second drive (instead of the first drive), and ignore the 2 GB swap partition. If this happens, starting Reddcoin can render the Raspberry Pi unresponsive.
Start Reddcoin Core easier Run a shell script (.sh file), so you can start Reddcoin just by double clicking on an icon on your Desktop.
Right Click on your Desktop and select Create New -> Empty File. ↳ Screenshot
Enter a file name, make sure it ends with .sh, and click on OK. I've chosen for Reddcoin.sh. ↳ Screenshot The file will be created on your Desktop. ↳ Screenshot
Add the command to start Reddcoin to the file.
Right click on the file, select Leafpad (to open the file in a text editor). ↳ Screenshot
Add the following to the file and save the file: sudo /media/rpi3b/usb/reddcoin/src/qt/reddcoin-qt ↳ Screenshot
To be able to execute the shell script (.sh), it has to have 'execute permissions'.
Right click on the file, and select Properties. ↳ Screenshot
Click on the Permissions tab.
For Execute, select Anyone, and click on OK. ↳ Screenshot
To start Reddcoin Core, double click on the file. A new window will pop-up, asking you what you want. Execute in Terminal is what we want, so you can click on enter. ↳ Screenshot Reddcoin Core will now start. Do not close the Terminal window, you can minimize it if needed.
Minimization options Adjust minimization options, so you can safely press on the X button (the close/exit button on the upper right corner).
Activate 'Minimize on close'. Settings -> Options... -> Window (tab) -> Minimize on close. ↳ Screenshot Reddcoin will still run when you click on the X button. To close/exit Reddcoin, right click on the Reddcoin icon in the system tray (bottom right corner). ↳ Screenshot
RealVNC VNC Viewer (client) and VNC Connect (server): To remote connect to the Raspberry Pi, I use VNC Viewer ad VNC Connect from RealVNC.
After your download is finished, open the file and click Install Package. ↳ Screenshot
To run the VNC Connect once:
Open [Menu] > Run, and enter: vncserver-x11 ↳ Screenshot
To auto run on startup:
Open Default applications for LXSession ([Menu] > Preferences > Default applications for LXSession). ↳ Screenshot
In LXSessions configuration, select Autostart in the menu left.
Under Manual autostarted applications, enter vncserver-x11 and click on + Add. ↳ Screenshot ↳ Screenshot
Reboot your Raspberry Pi and check if VNC Connect is started automatically after the reboot.
When VNC Connect is running, you'll see a VNC icon on the right bottom corner. Double click the icon to open VNC Connect and to see the IP address you need to enter to connect to your Raspberry Pi. ↳ Screenshot
Install Bitcoin-Qt Since version 0.9, Bitcoin-Qt was renamed to Bitcoin Core t o reduce confusion between Bitcoin-the-network and Bitcoin-the-software. Bitcoin Core is a full Bitcoin client. It is a thick client, meaning it requires the full blockchain (explained below) on local disk to operate and expose blockchain back to the network to help relay and verify transactions. Keep a copy (sync ... There are many discussions going on as there is a lack of a simple tutorial as to how to install Bitcoin Core (GUI) on Linux distributions, i.e Ubuntu 18.04. Bitcoin.org offers the tar.gz file (i.e. Bitcoin Core (formerly Bitcoin-Qt) is the third Bitcoin client, developed by Wladimir van der Laan based on the original reference code by Satoshi Nakamoto. It has been bundled with bitcoind since version 0.5. Bitcoin-Qt has been rebranded to Bitcoin Core since version 0.9.0 .. Bitcoin Core can be used as a desktop client for regular payments or as a server utility for merchants and other ... While running Bitcoin Core GUI, open the Settings menu and choose Options. On the Main tab, click Start Bitcoin on system login. Click the Ok button to save the new settings. The next time you login to your desktop, Bitcoin Core GUI will be automatically started minimized in the task bar. Bitcoin Wallet Vergleich – Die Besten Krypto Wallets 2020. Ein Bitcoin Wallet kann auch als digitale Geldbörse bezeichnet werden. Hier werden die Tokens unterschiedlichster Kryptowährungen gelagert. Dementsprechend ist es von essenzieller Bedeutung, dass man vertrauenswürdige Anbieter nutzt.
Comandos para instalar o GLPI no Ubuntu Desktop Atualiza o sistema # sudo apt-get update # sudo apt-get -y upgrade # sudo apt-get -y dist-upgrade Instala o m... To add the PPA and install Bitcoin open a terminal window (press Ctrl+Alt+T) and copy+paste the following lines: sudo apt-add-repository ppa:bitcoin/bitcoin -y sudo apt update && sudo apt install ... Bitcoin Daytrader 247 views. 10:15. Setup a Raspberry Pi Web Server with Your Own .COM Using Google Domains - Duration: 55:44. upgrdman 684,574 views. 55:44. Hosting a Website on Google Cloud ... Cum sa corectam aspectul aplicatiilor Qt pe mediile desktop bazate pe GTK (XFCE). How to correct the Qt apps theming on GTK based desktop environments (XFCE). sudo apt-get install qt4-qtconfig. This video is unavailable. Watch Queue Queue. Watch Queue Queue Queue